Nähanleitung Latzhose Fanny zum Dungaree Dress Fanny

Sewing instructions for the Fanny dungaree dress

Level: Intermediate - for experienced players

material

We recommend denim or cotton fabric.

1 fabric  

  • Sizes 34-42 Outer fabric 2.00 m (140cm wide)
  • Sizes 44-50 , outer fabric 2.30 m (140 cm wide)
  • Concealed zipper 1x22cm
  • 2 buttons

2 substances

  • Sizes 34-50 Skirt 1.60 m (140 cm wide)
  • Sizes 34-42 Outer fabric 1.00 m (140cm wide)
  • Sizes 44-50 , outer fabric 1.30 m (140 cm wide)
  • Concealed zipper 1x22cm
  • 2 buttons

Cut:

Seam allowances are included - 1cm wide or as indicated by the marking notches!

Cut out the pattern pieces from your outer fabric and interfacing. Place the fabric right side up. All pattern pieces should be lying with the printed side facing up. Always align the grainline arrow in the same direction on all pieces, parallel to the selvedge of the fabric. Transfer all notches from the pattern by making a 3mm snip with scissors or using chalk. Markings define the positions of dart ends, pocket positions, etc. Transfer these either with chalk or pins. It's best to roughly cut out all outer fabric pieces that will be fully interfaced first. After you've secured the interfacing, cut them out precisely. There's also a video here about gluing and securing pattern pieces.

You will need the following fabric:

  • 2x back part top in the fold
  • 4x carriers, 2 each as opposite sides
  • 1x front pocket
  • 2x front part top in break
  • 2x pocket bags, mirrored (cut from add-on)
  • 2x skirt pieces

Sewing instructions:

To sew the pinafore dress you will need a sewing machine and an overlock sewing machine, or alternatively the zigzag stitch of your sewing machine to finish the cut edges.

When sewing, pay attention to the seam allowance included in the pattern. Seam allowances not specifically marked are 1 cm wide!

Have fun sewing!

Click here for the complete sewing instructions for Fanny dungarees

Begin by working on the front patch pocket. Press the seam allowances under by 1 cm all around, and double-fold them at the opening. Topstitch the opening close to the edge.

Stitch the pocket close to the edge and a presser foot's width from the edge onto one of the upper front pieces. First, the flap is sewn right sides together and then stitched over the pocket using the same method.
Place the second upper front piece right sides together on top of the first and sew it together along the sides and top.
Now take the straps of the dungarees and sew the mirrored pieces together right sides facing along one of the long seams, so that you can then press the seam allowance open,...
...place right sides together and sew the other seam closed. Press the seam allowance open here as well.
Turn the straps right side out and topstitch them with a seam close to the edge and a presser foot's width away.
Place the finished straps right sides together on one of the upper back pieces and stitch them in place with a basting stitch one presser foot width away.
Next, place the second back piece right sides together on top of the first and stitch them together. Slide the straps slightly to the side so you don't accidentally sew them in place. Clip the seam allowances at the corners and trim the curves slightly. Turn the back bib right side out.

Next up is rock music:

The pocket linings for the in-seam pocket are sewn to the right side seam, right sides together. Note: The pocket linings are only sewn from notch to notch. Topstitch the front pocket lining close to the edge of the seam allowance inside the pocket opening.
Next, place the side seam right sides together and sew it from the hem to the lower pocket opening, then continue from the upper pocket opening to 1 cm below the waist. Press the seam allowance open, pressing both pocket bags forward as you go.
Now close the pocket bags and neaten the seam allowance. You can also secure the top of the pocket bag at the seam allowance.
Next up is the seam zipper: You can find more information about it here.
Sew the side seam of the left body piece, right sides together, up to the zipper position mark. Press the seam allowances open. Now position the zipper in the left side seam. Sew the concealed zipper in place using a suitable zipper foot.
Finally, iron the hem twice and stitch it all the way around.

Now all you have to do is sew on the skirt pieces.

On the skirt pieces (front and back), you'll need to sew gathering stitches along the top edge. These stitches help create even gathers. To do this, select the longest stitch setting on your sewing machine. Do not backstitch at the beginning or end of the gathering stitches; leave approximately 10 cm of thread. Sew two gathering stitches about 1 cm apart, positioned 0.5 cm and 1.5 cm from the cut edge, so that the final seam will be exactly between these two stitches.

Take the front skirt piece and pin it right sides together to the outer front piece. Now, carefully pull the two top threads on one side and gather the fabric until you reach the seam allowance of the front piece. You can now distribute the gathers evenly, then sew both pieces together and pull out the gathering threads. Repeat this process for the back piece. Press the seam allowance towards the bodice.

The seam allowance of the inner part is also ironed inwards and topstitched close to the edge from the outside in the shadow of the seam.

Stitch the bib with a seam close to the edge and a presser foot's width for protection.
Stitch the bib close to the edge and a step-foot width away.
Now all that's missing are suitable buttons and buttonholes. First, make the buttonholes, and then, after a fitting, determine the height of the buttons.
Your FANNY dress is finished!

If you get stuck or have any questions, please feel free to contact us by email at info@schnittmuster-berlin.de. We will reply as soon as possible. 

Have lots of fun with your new designer piece! 

Sincerely, your Schnittmuster-Berlin team.

Retour au blog